MB-102 400 Point Solderless Breadboard (BB-400) (MB-102 400)
Description MB-102 400 Point Solderless Breadboard (BB-400)
This 400-point breadboard allows you to quickly and repeatedly prototype electronic circuits without soldering, while maintaining accuracy, reliability and ease of debugging. Slots on the side allow several breadboards to be connected together, increasing the area of the electrical circuit to be placed. A double-sided tape is attached to the bottom of the prototyping board, which will give you the opportunity to securely stick it to any flat surface.
This breadboard has many holes electrically connected to each other by means of metal strips. The conclusions of radio components and microcircuits are inserted into these holes, and then connected by conductors or jumpers (pieces of stripped wires). The long rows of contacts at the top and bottom of the board are power rails, they serve to connect the numerous points of the circuit to the power source and ground. The hole spacing is 2.54mm, which is the standard lead spacing for most transistors and ICs in DIP packages, and resistors, capacitors, and other radio components usually have flexible, long leads that can be mounted anywhere.
Characteristic:
Connection points: 400 pcs
Pitch: 2.54mm
Size (LxWxH): 84 x 54 x 9 mm
Weight: 33 gr